bladox.com

[johan]

This might not be the right forum for this so if someone could point me to a solution out there on some webpage PLEASE DO SO!

I have followed this guide:

http://hackint0sh.org/forum/showthread.php?t=17738

My problem is the same one (?) as what NOSIM reports.

Everything works fine until step 3/15 and 3/16 were I do not get an Ok at the end. (In fact, the unix option "-w" on the command launchctl is not either recognized why I removed it. Is this the wrong way to go?! Seems to depend on the BSD-version.) I get the following:

# launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist
# turbo-info
initializing modem
AT+CPMS="SM","SM"
ERROR
AT+CMGF=0
ERROR
AT+CPMS?
ERROR
modem initiated
Mobile Phone/Serial Cable Communication Error
# turbo-app /private/var/root/applesaft.trb
SRC /private/var/root/applesaft.trb
SIZE 2208
initializing modem
AT+CPMS="SM","SM"
ERROR
AT+CMGF=0
ERROR
AT+CPMS?
ERROR
modem initiated
Mobile Phone/Serial Cable Communication Error
# launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist
#


Already the response I got after the "turbo-info", that is "Mobile Phone/Serial Cable Communication Error", is worrying. What might be wrong?
________
Wiki Vaporizer

[varistor]

Same problem here ... it's really frustrating. Is there no supportteam at Bladox ?WE NEED A SOLUTION.

I really tried everything. Don't come with the connection issue crap between sim and turbosim, I glued them gently on the sides and even put a little paper behind ! Can't reset with another phone because it says NO SIM.


# turbo-info
initializing modem
AT+CPMS="SM","SM"
ERROR
AT+CMGF=0
ERROR
AT+CPMS?
ERROR
modem initiated
Mobile Phone/Serial Cable Communication Error
# turbo-app /private/var/root/applesaft.trb
SRC /private/var/root/applesaft.trb
SIZE 2208
initializing modem
AT+CPMS="SM","SM"
ERROR
AT+CMGF=0
ERROR
AT+CPMS?
ERROR
modem initiated
Mobile Phone/Serial Cable Communication Error

==========================================

# turbo-info -v
initializing modem
1 -> ATV1
1 <- ATV1
OK
1 -> ATE1
1 <- ATE1
OK
1 -> AT+CPMS="SM","SM"
1 <- AT+CPMS="SM","SM"
ERROR
AT+CPMS="SM","SM"
ERROR
1 -> AT+CMGF=0
1 <- AT+CMGF=0
ERROR
AT+CMGF=0
ERROR
1 -> AT+CPMS?
1 <- AT+CPMS?
ERROR
AT+CPMS?
ERROR
modem initiated
1 -> AT+CMGW=9
1 <- AT+CMGW=9>
1 -> 029100110000810004FF0110
1 <- 029100110000810004FF0110
ERROR
Mobile Phone/Serial Cable Communication Error

============================================


# turbo-iphone-smsreset
Turbo Sim SMS Reset Utility for the iPhone -- Copyright 2007 iZsh

Credits: gruffy for discovering the root cause, iZsh
and special thanks to Zf and #iphone-turbosim for all the
support and help while tracking this problem down.

* Leet Hax not for commercial uses
Punishment: Monkeys coming out of your ass Bruce Almighty style.

Reading the SMS list (AT+CMGL)... ERROR while executing AT+CMGL.


============================================

[dmarreco]

Ive posted the same problem a few days ago.

I have solved it. The problem was indeed a bad contact beetween the tsim and the sim.

Thing is: the SIM cut is a tricky task. I had to cut my SIM all the way to the golden metallic contacts, and i had to use a sandpaper and lots of patience and care.

[cavenewt]

[twiederh]