bladox.com

[johnsecret]

I've followed the instructions on the site, and in the forums, but am having the same problems that others have had.

If I use the 50 pin connecter and use:

btldr.exe -d \\.\COM38 -t -v -l kernel.bin

I get the following:

Initializing device
Device initialized
Entering Application Mode
Application Mode entered
Turbo Adapter/BRUM bootloader mode initialized, turboadapter.trb
BOOTLOADER is erasing FLASH and EEPROM, wait for approx. 50s
BOOTLOADER is updating FLASH
Page 0/(0- 479)

And there is stays - I have a similar issue if I use the SIM adapter, and use the -s switch

If I use my other TL2 adapter, I get:

Initializing device
Device initialized
Entering Application Mode
Application Mode entered
Turbo Adapter/BRUM bootloader mode initialized, turboadapter.trb
BOOTLOADER is erasing FLASH and EEPROM, wait for approx. 50s

and it hangs there

I am using prog-utils 3.2.3 and kernel-TL2-1.3.7.bin

Many thanks

[johnsecret]

I've tried this on a linux box as well, with no joy

Please help, as this is really hampering our development ability

many thanks

[admin]

It is probably broken piece. Send it back to Bladox for examination, we will replace it.

Do you have the same problem with another TL2?

[johnsecret]

Yes, we have a problem with 2 TL2's, which started at different times - We'll contact you offline about it