| View previous topic :: View next topic |
| Author |
Message |
mastah playah
Joined: 15 Dec 2007
Posts: 1
|
 Posted: Sat Dec 15, 2007 10:01 pm Post subject: NO SIM problem with turbosim |
 |
|
Hi, hum i followed every step EXACLY right so theirs no problem there... i have an iphone 1.1.2 otb i downgraded then upgraded back set up the turbosim properly and everything, i put the card in and the iphone dosent recognize that i put anything in it basically seems like the turbosim dosent exist.... if i put in a regurlar sim in the iphone it says that its the wrong sim (which is normal... therefore its not the phone) i tried poping the turbosim in another phone and that phone also does not recognize its existance... anybody have any sujjestions or similar problem? ??? |
|
| Back to top |
|
 |
A3Australia
Guest
|
| Posted: Sun Dec 16, 2007 1:20 pm Post subject: TurboSIM not working? |
|
|
So you are back at 1.1.2 correct?
Jailbroken and Activated?
You have your SIM cut and installed with the programmed TurboSIM?
Have you checked that the two SIMs are touching each other correctly?
Use thin double-sided adhesive tape on YOUR SIM - just the plastic parts - DON'T COVER ANY GOLD COLOURED BITS.
Have you gone to the SIM APPLICATIONS MENU on your iPhone under Settings - Phone and SET the AppleSaft application?
After this you will still not see yourSIM card or any signal if you are not in the USA or an iPhone supported country.
You need to install iWorld via the Installer (blue icon) It is under Tweaks 1.1.2
Run iWorld and select the country in which you want to use your iPhone.
Your IPhone will re-start and you should have signal.
A3 Australia |
|
| Back to top |
|
|
burningspear
Joined: 14 Dec 2007
Posts: 7
|
|
| Back to top |
|
|
NoSIM
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Sun Dec 16, 2007 7:26 pm Post subject: Re: NO SIM problem with turbosim |
|
|
| mastah playah wrote: | | Hi, hum i followed every step EXACLY right so theirs no problem there... i have an iphone 1.1.2 otb i downgraded then upgraded back set up the turbosim properly and everything, i put the card in and the iphone dosent recognize that i put anything in it basically seems like the turbosim dosent exist.... if i put in a regurlar sim in the iphone it says that its the wrong sim (which is normal... therefore its not the phone) i tried poping the turbosim in another phone and that phone also does not recognize its existance... anybody have any sujjestions or similar problem???? |
I'm experiencing the excact same problem. And to let you know that I'm not completely nooby
So you are back at 1.1.2 correct? yes, jailbroken and working
Jailbroken and Activated? yes
You have your SIM cut and installed with the programmed TurboSIM? programmed? no it's blank, but turbo applications are in /bin folder on iphone
Have you checked that the two SIMs are touching each other correctly?
Use thin double-sided adhesive tape on YOUR SIM - just the plastic parts - DON'T COVER ANY GOLD COLOURED BITS.
Have you gone to the SIM APPLICATIONS MENU on your iPhone under Settings - Phone and SET the AppleSaft application? nope, Applesaft won't run when Iphone dosn't recognize TurboSim
After this you will still not see yourSIM card or any signal if you are not in the USA or an iPhone supported country.
You need to install iWorld via the Installer (blue icon) It is under Tweaks 1.1.2 yes - did that
When using Putty it says
# turbo-info
initializing modem
AT+CPMS="SM","SM"
ERROR
AT+CMGF=0
ERROR
AT+CPMS?
ERROR
modem initiated
Mobile Phone/Serial Cable Communication Error
Help - please, this is VERY frustrating, could the TurboSim be defect? I for sure didn't break it. I have used the Tsim with multiple sim in other phones, and it also says No Sim. |
|
| Back to top |
|
|
NoSIM
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Mon Dec 17, 2007 11:07 am Post subject: |
|
|
| mastah playah what did you do? Have you had any luck? |
|
| Back to top |
|
|
teodoropol
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Tue Dec 18, 2007 3:52 am Post subject: |
|
|
i have another type of problem.... my sim + turbosim. i have full signal with an orange.ro sim and the ts but i cannot receive any calls, i cannot call from the keypad, i cannot send msg.
i can only add contacts and the call from the contact list.
can someone help me with this ? |
|
| Back to top |
|
|
A3Australia
Guest
|
| Posted: Tue Dec 18, 2007 11:37 am Post subject: |
|
|
| teodoropol wrote: | i have another type of problem.... my sim + turbosim. i have full signal with an orange.ro sim and the ts but i cannot receive any calls, i cannot call from the keypad, i cannot send msg.
i can only add contacts and the call from the contact list.
can someone help me with this ? |
Hi!
I think it could be because you have not installed and run iWorld?
Please confirm and reply so others can benefit.
Thanks,
A3 Australia |
|
| Back to top |
|
|
teodoropol
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Tue Dec 18, 2007 3:31 pm Post subject: |
|
|
it might be... i don't know. i will install it when i get home. no wi-fi here.
hope that is it.
one more question. can i "erase" a TS and reprogram it for another phone ? |
|
| Back to top |
|
|
teodoropol
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Tue Dec 18, 2007 8:52 pm Post subject: |
|
|
thank you very much a3 !
turbosim works perfect now with 1.1.2 oob iphone.
i installed iWorld and now it works. is there a solution to copy the contacts from the sim? because atm my girlfriend does not have any contacts
can anyone help me with the other TS ? |
|
| Back to top |
|
|
teodoropol
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Thu Dec 20, 2007 1:07 pm Post subject: |
|
|
| A3 can you please help me ? |
|
| Back to top |
|
|
dmarreco
Joined: 23 Dec 2007
Posts: 3
|
| Posted: Sun Dec 23, 2007 2:38 am Post subject: Same problem |
|
|
I made the whole process on my 112 otb and got it fully functional and working.
at least for 20 minutes. after that i started getting the NO SIM message, for no reason at all. |
|
| Back to top |
|
|
mm
Guest
|
| Posted: Sun Dec 23, 2007 8:36 am Post subject: Re: Same problem |
|
|
| dmarreco wrote: | I made the whole process on my 112 otb and got it fully functional and working.
at least for 20 minutes. after that i started getting the NO SIM message, for no reason at all. |
Same here with 2 iphones, another 1 is working normaly. Any ideas? |
|
| Back to top |
|
|
niordane
Joined: 22 Dec 2007
Posts: 4
|
| Posted: Sun Dec 23, 2007 1:13 pm Post subject: |
|
|
salve teodoropol, imi dai mesaj la yahoo cu acelasi id?
multumesc, |
|
| Back to top |
|
|
A3Australia
Guest
|
| Posted: Mon Dec 24, 2007 1:23 pm Post subject: |
|
|
| teodoropol wrote: | thank you very much a3 !
turbosim works perfect now with 1.1.2 oob iphone.
i installed iWorld and now it works. is there a solution to copy the contacts from the sim? because atm my girlfriend does not have any contacts
can anyone help me with the other TS ? |
I believe that there is an app available via Installer that lets you transfer contacts from the SIM.
What do you mean can anyone help you with the other TurboSIM?
A3 Australia |
|
| Back to top |
|
|
teodoropol
Joined: 16 Dec 2007
Posts: 9
|
| Posted: Tue Dec 25, 2007 2:20 pm Post subject: |
|
|
| i need to "erase"/reset the other TurboSIM. i lost the anvelope, so i have no TS pin. is there any other method to reset it ? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
