 |
bladox.com
Turbo SIM Toolkit Adapter Forums
|
| View previous topic :: View next topic |
| Author |
Message |
jacko
Joined: 20 Dec 2010
Posts: 19
|
 Posted: Mon Dec 20, 2010 9:34 am Post subject: "no sim": please help! |
 |
|
Hi,
This is my first TurboSIM development, so bear with me if I'm doing anything really wrong...
I got a Turbo Motion 2, and I am trying to learn it.
I installed the precompiled Linux toolchain (avr1.tgz) and turbo-devel librairies.
I downloaded the latest autoalarm application, modified the makefile so that it points to the path of the turbo-devel libraries. I then did "make", and used avr-objdump --turbo to create a .trb file.
I then connected the Turbo Motion 2 to the edge connector of the Turbo Programmer 2, and used the btldr application to upload.
It went through the various steps (erasing flash, copying to SRAM, copying to flash) and said the process has been completed successfully.
I removed the Turbo Motion 2 from the Turbo Programmer 2, insered a SIM card, and insered the TM2 fake SIM into the phone.
The phone says "NO SIM"... what did I do wrong ?
The TM2 serial number can still be read from the PC (and it says bootloader version 4), so it's alive, but the phone doesn't detect it. I have tried with different phones, no success.
Please help! Thanks |
|
| Back to top |
|
 |
dary
Joined: 15 Oct 2007
Posts: 54
|
| Posted: Tue Dec 21, 2010 12:48 pm Post subject: |
|
|
Was your TM2 working befor you uploaded your .trb file?
You can not upload a .trb file with btldr application, use cemu application for this.
Read the Tutorials pages available here http://www.bladox.com/docs.php?lang=en
Reset TM2 with "cemu --reset" command.
Download Auto Alarm application from here http://www.bladox.com/app_autoalarm.php?lang=en
There is autoalarm.trb file in bin folder - load it into your TM2 as described in tutorial - use "cemu --app autoalarm.trb" |
|
| Back to top |
|
|
jacko
Joined: 20 Dec 2010
Posts: 19
|
| Posted: Tue Dec 21, 2010 1:34 pm Post subject: |
|
|
| dary wrote: | | Was your TM2 working befor you uploaded your .trb file? |
Well, I'm not sure: how can I know if it's working before I load an application on it? 
Do you mean that I flashed something I shouldn't?
Maybe I have erased the device kernel! I tried downloading it from the Bladox Downloads page, but it's nowhere to be found. I also sent an e-mail to Bladox about this, but so far they did not reply.
Where can I download the kernel ? I would like to try reflashing it.
| dary wrote: | | Reset TM2 with "cemu --reset" command. |
I connect the TM2 to the TP2 SIM connector, run the `cemu --reset` command, and all I get is :
SIM mode initialized, sim.trb
NO SIM
I tried both with and without a SIM card in the TM2.
Same thing: it says NO SIM
Any idea?
Thanks |
|
| Back to top |
|
|
dary
Joined: 15 Oct 2007
Posts: 54
|
| Posted: Wed Dec 22, 2010 4:55 pm Post subject: |
|
|
| jacko wrote: | | Well, I'm not sure: how can I know if it's working before I load an application on it? |
All Bladox's products are shipped with firmware/applications installed and are working.
| jacko wrote: | | Do you mean that I flashed something I shouldn't? |
Probably yes.
| jacko wrote: | I connect the TM2 to the TP2 SIM connector, run the `cemu --reset` command, and all I get is :
SIM mode initialized, sim.trb
NO SIM
I tried both with and without a SIM card in the TM2. |
It is necessary to have a SIM card in TM2 when cemu is used.
Be sure that you have good contact between programmer and TM2. We recommend to remove SIM lock door and use clothes peg to keep device in SIM lock in place. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
