View previous topic :: View next topic |
Author |
Message |
johnsecret
Joined: 04 Sep 2010 Posts: 20
|
Posted: Tue Mar 15, 2011 5:30 pm Post subject: Can't flash TL2 |
|
|
I've followed the instructions on the site, and in the forums, but am having the same problems that others have had.
If I use the 50 pin connecter and use:
btldr.exe -d \\.\COM38 -t -v -l kernel.bin
I get the following:
Initializing device
Device initialized
Entering Application Mode
Application Mode entered
Turbo Adapter/BRUM bootloader mode initialized, turboadapter.trb
BOOTLOADER is erasing FLASH and EEPROM, wait for approx. 50s
BOOTLOADER is updating FLASH
Page 0/(0- 479)
And there is stays - I have a similar issue if I use the SIM adapter, and use the -s switch
If I use my other TL2 adapter, I get:
Initializing device
Device initialized
Entering Application Mode
Application Mode entered
Turbo Adapter/BRUM bootloader mode initialized, turboadapter.trb
BOOTLOADER is erasing FLASH and EEPROM, wait for approx. 50s
and it hangs there
I am using prog-utils 3.2.3 and kernel-TL2-1.3.7.bin
Many thanks |
|
Back to top |
|
|
johnsecret
Joined: 04 Sep 2010 Posts: 20
|
Posted: Wed Mar 16, 2011 4:04 pm Post subject: |
|
|
I've tried this on a linux box as well, with no joy
Please help, as this is really hampering our development ability
many thanks |
|
Back to top |
|
|
admin Site Admin
Joined: 02 Feb 2004 Posts: 61
|
Posted: Thu Mar 17, 2011 9:46 am Post subject: |
|
|
It is probably broken piece. Send it back to Bladox for examination, we will replace it.
Do you have the same problem with another TL2? |
|
Back to top |
|
|
johnsecret
Joined: 04 Sep 2010 Posts: 20
|
Posted: Thu Mar 17, 2011 12:35 pm Post subject: |
|
|
Yes, we have a problem with 2 TL2's, which started at different times - We'll contact you offline about it |
|
Back to top |
|
|
|